+1(855) 201-8071
24x7 Available   |   Technical Experts | (877) 778-0205

Discover how to easily set up the MSRM WiFi Extender and extend your wireless network coverage. This step-by-step guide provides clear instructions on finding an ideal location, powering up the extender, connecting to it, and following the user-friendly setup wizard. Learn how to select your existing WiFi network, enter the password, and configure the extended network settings. With the MSRM WiFi Extender, you can eliminate dead zones and enjoy seamless connectivity throughout your home or office. Say goodbye to weak signals and experience improved WiFi performance effortlessly. Get started with the MSRM WiFi Extender setup today!

Here's a step-by-step guide on how to set up the MSRM WiFi Extender:

  1. 1.  Find a suitable location:
  2. Choose a spot for the extender within the range of your existing WiFi router. Make sure it is close enough to receive a strong signal.
  1. 2.  Power up the extender:
  2. Plug the MSRM WiFi Extender into a power outlet near your router. Wait for the power LED indicator to turn solid.
  1. 3.  Connect to the extender:
  2. On your computer or smartphone, go to your device’s WiFi settings and connect to the network named “MSRM_ext.” It might take a moment for the network to appear.
  1. 4.  Launch a web browser:
  2. Open a web browser like Chrome, Firefox, or Safari. The browser will automatically redirect you to the extender’s setup page. If not, enter “http://ap.setup” or “” in the address bar.
  1. 5.  Follow the setup wizard:
  2. On the setup page, you will find a step-by-step wizard. Follow the instructions to configure the extender.
  1. 6.  Select your existing WiFi network:
  2. The setup wizard will detect available WiFi networks. Choose your existing WiFi network from the list and click “Next.”
  1. 7.  Enter the WiFi password:
  2. Enter the password for your existing WiFi network and click “Next” or “Connect.” The extender will establish a connection to your router.
  1. 8.  Configure the extended WiFi network:
  2. You can now set a new name and password for the extended WiFi network. This will be the network that your devices will connect to for an extended range.
  1. 9.  Apply settings and wait:
  2. Once you’ve entered the desired network details, click “Apply” or “Finish” to save the settings. The extender will reboot, and the process may take a few minutes.
  1. 10.  Connect your devices:
  2. After the extender restarts, go to your device’s WiFi settings and connect to the newly created extended network using the new password. Enjoy the extended WiFi coverage!

Remember to place the MSRM WiFi Extender in an optimal location, away from obstructions, for the best signal reception. If you encounter any issues, refer to the user manual or contact MSRM support for further assistance.

MSRM WiFi Extender Setup through WPS (WiFi Protected Setup):
  1. 1.  Plug in the extender:
  2. Connect the MSRM WiFi Extender to a power outlet near your existing WiFi router.
  1. 2.  Enable WPS on your router:
  2. Locate the WPS button on your router. Press and hold it for a few seconds until the WPS indicator starts blinking.
  1. 3.  Activate WPS on the extender:
  2. Find the WPS button on the MSRM WiFi Extender. Press and hold it for a few seconds until the WPS LED starts flashing.
  1. 4.  Establish a connection:
  2. The WPS LED on the extender will eventually turn solid, indicating that a connection has been established between the extender and your router.
  1. 5.  Place the extender:
  2. If needed, move the MSRM WiFi Extender to a desired location within the range of your router but closer to the area where you require extended WiFi coverage.
  1. 6.  Connect your devices:
  2. Using your device’s WiFi settings, locate the list of available networks and connect to the extended network created by the MSRM WiFi Extender. The network name (SSID) should be similar to your existing network with “_EXT” appended to it.
  1. 7.  Enter the password:
  2. When prompted, enter the password for the extended network. This password is the same as your existing WiFi network password.
  1. 8.  Confirm the connection:
  2. Once you’ve entered the password, your device will connect to the MSRM WiFi Extender’s extended network. The connection is now established.

How to Reset MSRM WiFi Extender?

By following these steps, you can reset your MSRM WiFi Extender back to its original factory settings. Remember to reconfigure the extender with your desired settings after the reset is complete.


Congratulations on completing the process of your MSRM WiFi Extender setup! You now have the necessary tools to expand your WiFi coverage and eliminate those frustrating dead zones. This comprehensive guide has provided you with the knowledge to optimize your network, ensuring seamless connectivity throughout your space. Experience the power of stronger signals and enjoy uninterrupted internet access on all your devices.

If you require any assistance during the setup process, our dedicated technical experts are just a phone call away. They will guide you through each step, ensuring a successful MSRM extender setup. Take control of your WiFi experience and elevate your connectivity to new heights with the MSRM US754 WiFi Extender.